NWFRoutingStrategy Properties |  |
Learn more about Verizon Connect GeoBase.
Get information about the latest release
The NWFRoutingStrategy type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AllowUTurns |
When true, allows the routing engine to instruct a u-turn. When false, generated
routes will not contain u-turns if possible. Default is true.
(Inherited from RoutingStrategy.) |
| CostUnits |
Returns the units that the costs are calculated in.
(Inherited from RoutingStrategy.) |
| CrossAtTrafficSignalsUnpenalized |
If traffic signal data is available and a crossing turn is being performed at an intersection
controlled by traffic lights, allow a crossing turn to be performed with no penalty.
(Inherited from RoutingStrategyFastest.) |
| CrossingTurnPenalty |
The penalty applied during routing for making a turn that crosses traffic. So in a country
that drives on the right side of the road, left turns will be penalized if they cross
a lane of traffic. Default is no penalty.
(Inherited from RoutingStrategyFastest.) |
| CustomCostFunction |
Gets or sets a custom function used to adjust the cost associated with a particular link.
(Inherited from RoutingStrategy.) |
| CustomRoutingAccessKeys |
Gets or sets the custom routing access keys for this route.
(Inherited from RoutingStrategy.) |
| DefaultProfile | Obsolete.
The default RoutingProfile for
all countries. This profile will be overridden if a profile has been set for another country.
(Inherited from RoutingStrategy.) |
| ExtraProcessingRatio |
Used to increase the area of the bounding boxes for querying the network.
(Inherited from RoutingStrategy.) |
| IgnoreConstraints |
When true, tells the routing engine to ignore all constraints. When false (default), constraints are obeyed.
(Inherited from RoutingStrategy.) |
| IgnoreDrivingDirection |
When true, tells the routing engine to ignore the direction of one way roads.
Default is false.
(Inherited from RoutingStrategy.) |
| KeepOut |
Sets a GeoFence area where the router will
not send vehicles. You can use this to keep the route from going through a specific
area.
(Inherited from RoutingStrategy.) |
| KeyAccessPredicate |
Gets or sets a custom predicate used to instruct the routing engine whether an access constraint may be ignored.
(Inherited from RoutingStrategy.) |
 | LinkEdits |
A set of link edits that, for selected links, will override the default speed that is
used when calculating a route.
(Inherited from RoutingStrategy.) |
| ObeyPreferredConstraints |
When true, tells the routing engine to use preferred constraints. May introduce a performance penalty.
When false (default), preferred constraints are not obeyed.
(Inherited from RoutingStrategy.) |
| RoadCrossingBehavior |
Sets the permitted type of road crossing behavior (Allowed, Discouraged, Forbidden).
(Inherited from RoutingStrategy.) |
| UseFerries |
Sets whether ferry crossings are allowed (true) or should be avoided as much as possible (false).
Default is true.
(Inherited from RoutingStrategy.) |
| UseTollRoads |
Gets or sets whether this route is allowed to use toll roads. Default is true.
(Inherited from RoutingStrategy.) |
| UTurnPenalty |
The penalty applied during routing for performing a u-turn. The default cost is 80 seconds.
(Inherited from RoutingStrategyFastest.) |
See Also