RouteStop Properties |  |
Learn more about Verizon Connect GeoBase.
Get information about the latest release
The RouteStop type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | Approaches |
List of AccessPaths that can be used to approach this route stop.
|
| AverageTime |
Average time spent at this stop.
|
| Departures |
List of AccessPaths that can be used to depart from this route stop.
|
| Description |
Description of the stop. See remarks.
|
| DrawHandle |
Set to true to display a handle on the RouteStop icon. The handle allows the
user to rotate the heading of the stop.
|
| End |
If true this stop is the end point for the route.
See Start for more details.
|
| Heading |
The heading for this route stop. This value will be used to choose which street this
RouteStop belongs on - GeoBase will try to route to a street that is aligned with
this heading. For example, this can be used to avoid accidentally routing from a
cross street. If this value is float.NaN, then this behavior will be ignored.
|
| IconNumber |
Sets the type of icon displayed for the stop.
|
| IdlePenalty |
Used to specify a penalty for the idle time. When set, this value is
used as the penalty for a TooEarly violation during Route Optimization i.e., the
waiting time at the stop.
|
| IgnitionOn | Obsolete.
Whether the unit's ignition was on when it was at this stop in the
route history. Used when calculating a route highlight.
|
| Location |
Location of the stop point, as a LatLon.
|
| MapMouseEventsHandler |
Gets the MapMouseEventsHandler for this RouteStop.
|
| Penalty |
Represents a penalty incurred for missing the alloted window. The penalty must be
greater than or equal to zero. A value of -1 indicates that the penalty has not been set.
|
 | RenderBrush |
A Brush used to color this stop.
|
| RenderSize |
Gets the render Size used for this stop.
|
| RequiredRendermodes |
Gets the RenderMode required by this RouteStop.
|
| RoadIntersection |
Point where you enter or exit the street network to get to this stop.
|
| Speed |
Gets or sets the speed when at or passing the RouteStop.
|
| Start |
If true this stop is the start point for the route.
|
| StopNumber |
The Number of this stop. Set by the routing engine.
|
| Tag |
For external use - set to whatever you like.
|
| TimeSincePreviousStop |
Time in seconds since the unit was at the previous stop in the
route history. Used when calculating a route highlight. If this
value is too small, the routing engine will fail to query
an area that is sufficiently large in size.
|
| WindowEnd |
Latest delivery time.
|
| WindowStart |
Earliest delivery time.
|
See Also